Maintaining your Washing Machine

Washing Machine Repair at Drooto

Maintaining your Washing Machine

Most households get to enjoy the convenience of having a washing machine installed in the laundry room. Having piles of dirty clothes and linens taken care of so efficiently can often be taken for granted—that is until this modern convenience breaks down and leaves you with loads of laundry to sort out on your own. Read this blog post from Drooto’s Support Team and know all about Washing Machine Maintenance, and try to do as much as possible to increase longevity.

Inspect the hoses

Check your washing machine’s water hoses for signs of wear or weakness a few times each year. If you discover any cracks or blistering, replace the hose. Any damage could cause a leak or burst – and extremely expensive flood damage in your home. Most manufacturers recommend replacing the hoses every five years. For more peace of mind, use high-quality, stainless steel hoses.

Prevent flood damage

In the event that your washing machine’s fill hoses burst or water level switch malfunctions, you’ll have instant water damage in the room.

These two products can prevent this:

  • Water Shutoff System: This water shutoff system prevents water damage by automatically shutting off the water flow when a malfunction is detected. Installation can be completed in five minutes. No special tools are needed.
  • Washing Machine Overflow Pan: For smaller leaks and drips, this popular plastic pan fits beneath a washing machine and will protect a floor from water damage due to overflow and leakage. It has a fitting to accommodate drain line attachment.
Don’t overload it

Follow the owner’s manual’s instructions for appropriate loading sizes. Oversized loads will throw the machine off balance and that will lead to problems.

Keep it level

It’s abnormal for washing machines to vibrate the floor and walls of your laundry room. If your washing machine is not exactly level, with all four legs on the floor, it may rock back and forth and vibrate strongly.

It’s best to keep the machine as close to the floor as possible. The closer the machine sits to the floor, the less it will vibrate. The front legs are adjustable with a locknut. Position the legs at the desired height and tighten the lock nut against the body of the machine so that the legs cannot rotate. Some models also have adjustable legs in the rear, too. Follow the same process for adjusting those.

It is more common for machines to have self-adjusting rear legs. Ask someone to assist you with this. Tilt the machine forward on its front legs so that the rear legs are three to four inches from the floor. When you set the machine back down to rest all on all four legs, the legs should adjust automatically. If you find that they are not level, tilt the machine forward again and tap on the rear legs with the handle of a hammer to loosen them. Another option would be to purchase leveling leg pads to assist in noise reduction.

Use the appropriate amount of detergent

Regardless of what’s recommended on detergent packaging, follow your owner’s manual for the manufacturer’s recommended amount of detergent. If you have soft water you will need to greatly reduce the amount of soap used. Rule of thumb is a thin layer of suds in the wash cycle. If there is too many suds, the rinse cycle may not get them all out.

Clean the inside once monthly

It’s common for detergent residue to build up inside of washing machine tubs. Use a cleaner once per month to keep high-efficiency washing machines free of odor-causing residue.

Clean out the fabric softener dispenser

Gooey in nature, liquid fabric softener is known to gum up along fabric softener dispensers. Use a damp rag and hot water to clean the dispenser periodically. If you’re using fabric softener in an agitator you can dilute the softener with water to make it flow better and not spray in the agitator.

Clean out the fabric softener dispenser

Spilled detergent, stain remover and fabric softener dry to a sticky mess. This all-purpose cleaner and a rag will make cleaning easy.

Touch up gashes and scrapes with paint

Prevent rusting by taking care of gashes and scrapes right away using touch-up paint.

Hiring a Professional

When your air conditioner needs more than regular maintenance, hire a professional service technician. A well-trained technician will find and fix problems in your washing machine.

Click Here to read directly from the source page.

Make your technology troubles a thing of the past with our comprehensive repair service.

Just give our on-call experts a ring and we’ll do everything we can to get your kit sorted – whether it’s an Air Conditioner or Smart TV or Refrigerator. Give us a call on 09678 767676 to get started.

 

One thought on “Maintaining your Washing Machine”

  1. I like how this article mentioned to find a professional to repair your washing machine as they can find and fix problems with more ease. My dad once tried to fix our washing machine, and while it worked for a little while longer, it ended up developing more problems. I think it’s important to get a professional when you aren’t entirely sure how to fix an appliance.

Leave a Reply

About Drooto

Drooto provides a seamless platform to solve all your home electronics needs. Our dedicated technical team of over 100 technicians will provide you the best installation and repair service in Bangladesh.

Corporate Head Office

City Centre (Level 16), 90/1 Motijheel C/A, Dhaka 1000, Bangladesh

09678767676
urgent@drooto.com.bd

Opening Hours
Sat - Thu 09:00 - 17:00